Shopping cart
₹0.00
Sale!

PreSonus Sceptre S6 (Pair)

Out of stock
  • 2-way active studio monitor with 6.5″ LF and 1″ HF in coaxial configuration
  • CoActual technology combines DSP time-correction and point-source design
  • Symmetrical soundstage and micro-definition imaging
  • Coaxial Speaker Coherence Alignment
  • 32-bit, 96kHz, dual-core, active floating-point DSP
  • Acoustic-tuning controls let you tune your monitors to your room
  • Bi-amplified with 180W of Class D power; internal heat sink and power supply

Original price was: ₹174,300.00.Current price is: ₹156,800.00.

Out of stock

Category:
presonus-logo

Description

The first time you hear Sceptre-series CoActual™ 2-way studio monitors, you’ll discover fine nuances of your music that can’t be reproduced by conventional designs. The Sceptre’s panoramic soundstage, fine detail, and stunning dynamics will astonish you.

The coaxial conundrum.
​​Coaxial designs offer the advantages of a single point source for a consistent acoustic center and a symmetrical dispersion pattern. But designing coaxial systems without acoustic anomalies has been extremely expensive—until now.

The magic of TQ.
Each Sceptre monitor contains a DSP chip that enables the use of Fulcrum Acoustic’s TQ algorithms. The result is speakers that deliver the full benefits of coaxial design.

Monitors you can customize.
Sceptres provide extensive user-adjustable contour features that let you optimize the monitors for any mixing space.

Big woof or huge woof
The Sceptre series includes two models with the same high/mid coaxial section. The S6 delivers far better bass response than you’d expect for its size.

Features:
CoActual technology

  •     Combines DSP time-correction and point-source design for symmetrical soundstage and micro-definition imaging
  •     Unique coaxial transducer integrates  6.5-inch  midrange driver and 1-inch (25 mm), horn-loaded HF transducer with Coaxial Speaker Coherence Alignment
  •     Powerful DSP provides critical Temporal Equalization™ with multiple FIR filters

Acoustic-tuning controls

  •     HF Driver Adjust (0 dB, +1 dB, -1.5 dB, -4 dB)
  •     Acoustic Space settings (0 dB, -1.5 dB, -3 dB, -6 dB)
  •     High-pass filter (Off, 60 Hz, 80 Hz, and 100 Hz, -24 dB/octave slope)
  •     Sensitivity (+4 dBu to -10 dBV)

Power and safety

  •     180W RMS, Class D biamplification with internal heat sink
  •     102 dB maximum continuous SPL
  •     RF shielding, current-output limiting, and over-temperature protection
  •     Amplifier “soft start” feature eliminates popping on power-up
  •     Internal power supply with IEC connector
  •     Power switch with on/off LED

Inputs and outputs

  •     Balanced XLR and ¼-inch TRS line-level inputs with A-taper level control

Specifications:
Inputs

  •     1- Balanced XLR
  •     1- Balanced ¼” TRS

Performance

  • Frequency Response (-3 dB)     52 Hz – 20 kHz
  • Frequency Response (-10 dB)     42 Hz – 23 kHz
  • Crossover Frequency     2.2 kHz
  • LF Amplifier Power (@ 4Ω)    90W
  • HF Amplifier Power (@ 4Ω)    90W
  • Peak SPL (@ 1 meter)     109 dB
  • LF Driver     6.25” glass-reinforced paper
  • HF Driver     1” diaphragm compression driver
  • Input Impedance     10 kΩ

User Controls

  • Volume Range     A-type taper     A-type taper
  • HF Control     Flat, +1, -1.5, -4 dB
  • Flat, +1, -1.5, -4 dB
  • Low Cut     Flat, 60, 80 Hz, 100 Hz
  • Acoustic Space     Flat, -1.5, -3, -6 dB

Protection

  •     RF interference
  •     Over-current
  •     Over-voltage
  •     Over-temperature
  •     Turn-on/off transient
  •     Subsonic filter
  •     External mains fuse

Power

  •     100-120V ~50/60 Hz or 220-240V ~50/60 Hz

Cabinet

  •     Vinyl-laminated, medium-density fiberboard

Physical

  • Width     9” (230 mm)
  • Depth     12.2” (310 mm)
  • Height     13.2” (335 mm)
  • Weight     18.8 lbs (8.53 kg)

Brand

Presonus

presonus-logo

Reviews

There are no reviews yet.

Be the first to review “PreSonus Sceptre S6 (Pair)”

Your email address will not be published. Required fields are marked *

Need Help